Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Arlington Homeowners Choose Trane Air Duct Cleaning
We provide independent Trane air duct cleaning, coil cleaning, duct sealing and duct repair in Arlington, and we do it with the same professional-grade equipment on every job: Rotobrush rotary-brush systems, Nikro high-powered vacuum rigs, and Abatement Technologies gear for heavier contamination. What sets our Trane work apart is that we read the whole air-handling system, not just the ducts: we check static pressure, watch how the air handler behaves, and then clean or repair what’s actually choking the airflow. Paragon Air Duct Cleaning is an independent service provider. We are not affiliated with, authorized by, or a dealer for Trane, and we don’t claim to be. Our technicians have up to 12 years of experience, and they work on Trane equipment in Arlington every week. Call (844) 787-8766. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Paragon Air Duct Cleaning for Your Trane Air Duct Cleaning?
Trane makes well-built equipment, and it’s unforgiving about duct problems. A Trane variable-speed air handler is designed to run long and slow, but only when it isn’t fighting a leaky return or a sagging flex run. Our technicians know that behavior well. They’ve spent up to 12 years learning how these systems respond to restriction, and they can tell the difference between a blower that’s ramping because a coil face is loaded with dust and one that’s ramping because a return plenum was undersized from the start.
We service Trane equipment with quality parts that fit it and service practices that protect the warranty rather than put it at risk. That means no cutting corners into a cased coil, no caulk on a sensor, and no sloppy mastic where a factory seal belongs. Because we’re independent, we have no incentive to steer you toward a manufacturer-branded replacement part or an authorized-dealer process unless that’s genuinely the right answer for your Arlington home. We don’t just clean – we repair, which means we can find and fix the structural problems that keep feeding contamination back into your Trane system. Professional-grade equipment, every job.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Trane Air Duct Cleaning Problems We Fix in Arlington
- Leaky, undersized return plenums on Trane split systems. When the return side pulls attic air instead of house air, the variable-speed air handler hunts for static pressure and runs at higher blower speeds than it was designed for. Homeowners hear it before they understand it: a blower that seems louder and more restless than it used to be. Sealing the return and correcting the plenum sizing settles the system back into its intended rhythm.
- Dirty or partially clogged Trane cased evaporator coils. The all-aluminum coil designs Trane uses can load up gradually, and the symptom rarely looks like a filter problem. It shows up as frozen suction lines and a low delta-T, or a coil that ices over on a humid Arlington afternoon. Coil face cleaning is often the difference between a system that cools hard and one that just runs.
- Loose, unsealed and sagging flex duct in Arlington attics. Much of this city’s housing is post-1970 slab-and-attic construction, with flexible runs crossing hot attics and older galvanized trunk lines that separate at the joints. A disconnected flex run dumps conditioned air straight into the attic and starves the Trane air handler of the return it needs.
- Mastic and tape failures at trunk-to-branch takeoffs. The joints where metal trunks branch off to individual rooms are where sealant ages out first in a hot attic. When they fail, the system pulls attic or garage air into the Trane supply path – dust, insulation fibers and all. Video inspection usually pinpoints these in minutes.
- Storm-damaged attic ductwork. After a spring hail or high-wind event, Arlington technicians routinely find attic runs crushed by fallen limbs or punctured by hail, and 1980s-era flex duct that has collapsed entirely where it sags between ceiling joists. Repair, not a tune-up, is the honest answer there.
Trane Parts & Our Repair-vs-Replace Approach
Where a Trane part is the right call – a blower motor, control board, coil, or sensor – we specify OEM or a documented OEM-equivalent, so the repair behaves the way the system was engineered to. Where flex duct, mastic, duct board or insulation will do the job, we use quality aftermarket materials rather than paying a brand premium for sheet metal and sealant that don’t need one. We don’t stock or carry genuine Trane parts, and we don’t claim to.
The harder question is whether to repair at all. If a Trane coil is leaking refrigerant or a communicating control board has failed outright, we tell you plainly whether sealing and cleaning will get useful life out of the existing equipment, or whether replacement is the honest answer. You’ll hear it straight, not softened into a sales pitch. Call (844) 787-8766 for a free estimate on the right path for your system.
Our Trane Service Process – Step by Step
- 1
Diagnose. We start with a video inspection of the returns and supply trunks, then confirm static pressure and airflow at the air handler. On a Trane variable-speed system, that baseline tells us whether we’re looking at a duct restriction, a coil problem, or both.
- 2
Repair or clean. Depending on what the inspection shows, we clean the evaporator coil and blower, reseal failed takeoffs and plenum joints with mastic, replace damaged flex sections, or complete structural duct repair – whichever the system genuinely needs.
- 3
Test. We re-check static pressure and airflow after the work, then watch how the Trane air handler behaves. A properly sealed system lets a variable-speed blower settle back to its intended staging instead of hunting for pressure.
- 4
Warranty-safe handoff. Everything we do is done in a way that respects the manufacturer’s service expectations, and we walk you through what was cleaned, sealed or replaced so you have a clear record of the work.
See the difference
Before
After
Before
After
Before
AfterTrane Products We Service & Install in Arlington
We work across the Trane lineup you’ll find in Arlington homes: XR14 and XR16 split-system condensers with their matching air handlers, the XLi and XL premium split systems paired with variable-speed air handlers, the XV variable-speed communicating systems built around the XV80 and XV95 furnaces, and Trane packaged gas/electric units – the Precedent-style equipment that sits on a pad or roofline rather than in a closet. On the air-quality side, we’re familiar with Honeywell, Aprilaire and Guardsman components, so we understand the full air-handling ecosystem your Trane equipment sits inside, not just the ducts in isolation. If it moves air in your house, we can inspect it.
We Also Service These Brands
We’re not a single-brand shop. Alongside Trane, we service Lennox and Carrier systems with the same equipment and the same diagnostic approach. That matters in a market where duct problems don’t care whose name is on the condenser. Whatever brand is in your Arlington attic, the airflow principles are the same, and so is the standard of work.
FAQs – Trane Air Duct Cleaning Service in Arlington
No. We are an independent service provider and are not affiliated with, authorized by, or a dealer for Trane. We work on Trane equipment every week in Arlington, but we make no claim to manufacturer authorization, certification or factory training. Independence is the point: we recommend what the ductwork and air handler actually need.
Yes. For Trane components – blower motors, control boards, coils, sensors – we specify OEM or a documented OEM-equivalent. For flex duct, mastic, duct board and insulation, we use quality materials that do the job without a brand premium. We don’t stock or carry genuine Trane parts.
Most duct cleaning and coil cleaning jobs on a Trane split system are completed in a single visit, though the exact time depends on how many runs need attention and whether repair work is involved. A video inspection up front lets us give you a realistic picture before we start. Call (844) 787-8766 for a free estimate.
We cover Trane split systems (XR14, XR16, XLi and XL premium systems with variable-speed air handlers), the XV variable-speed communicating systems, and Trane packaged gas/electric units. If you’re not sure which one you have, we’ll identify it during the inspection.
Proper cleaning, sealing and repair done with quality parts and correct practices won’t void a manufacturer warranty. Our work is performed to protect the equipment rather than compromise it. If a warranty question comes up, we’ll tell you plainly what we can and can’t speak to.
Pricing is per system, not per vent, and the written estimate sets the final price before any work begins. Whole-system cleaning on a Trane split system typically falls in a moderate range depending on the number of runs, attic access and whether duct repair is needed. We don’t quote teaser prices. Call (844) 787-8766 for a free estimate – it’s the only way to get an accurate number for your home.
Yes. If the coil face is loaded with dust, cleaning the ducts won’t restore proper airflow. On Trane cased coils, the restriction shows up as frozen suction lines and a low delta-T rather than an obvious filter problem. We clean the coil as part of the job so the system actually breathes.
Often, yes. A variable-speed air handler that keeps ramping to high speed is usually fighting static pressure from a leaking or undersized return, or from a sagging flex run that’s disconnected in the attic. A video inspection and a static pressure check usually confirm it in a single visit.
Yes. Packaged gas/electric units and split systems both need their supply and return paths cleaned, sealed and inspected, and the equipment for the work is the same. Call (844) 787-8766 for a free estimate on either type.
Yes. A Trane system’s efficiency ratings assume sealed, properly sized ductwork. Leaky takeoffs and plenum joints dump conditioned air into the attic, so the equipment runs longer to hit the same result. Duct sealing closes those leaks and lets the ratings translate into real performance.
Yes. The all-aluminum coil designs are more resistant to corrosion but still load up with dust, and they need careful cleaning rather than a harsh chemical wash that can damage the fin surface. We clean them with the right method for the material.
Book Your Trane Service in Arlington, TX
If your Trane system is running loud, cooling unevenly or just not moving air the way it once did, the fix usually starts with the ducts and the coil, not the equipment. Paragon Air Duct Cleaning provides independent Trane air duct cleaning, coil cleaning, duct sealing and repair in Arlington. Call (844) 787-8766. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written price is set per system before work starts.
Written by the team at Paragon Air Duct Cleaning.